How to get dead algae in your pool
One day, you may find that your pool floor is covered with dead algae, and you’re probably not sure what it is.
Algae come in several different varieties: yellow, green, black and pink. If you feel algae blooming in your pool, chlorine enters the water and tries to kill as much as possible. This breaks down the algae because the invasive particles are sent through the skimmer and the filter removes them from the pool water.
So, why is there still a bunch of dead algae lying on the floor?
This is because the algae particles are so fine, some of them freeze at the bottom of the pool instead of being sent to the filter. Once the dead algae have settled, it will look as if a gray or brown dust has hit the floor.
Note: Dirt can sometimes be mistaken for dead algae under the pool. If you can easily capture it with your fingers, it is probably dirty. No stress, there is a separate guide on how to get rid of dirt..
Dead algae a problem?
In addition to looking aesthetically unpleasant, leaving dead algae in the pool means there are still particles floating in the water, which will try to clean your filter.
This can shorten the lifespan of the filter (depending on how much algae it contains. Additionally, dead algae can stain the surface of your pool if it lasts too long. best pool vacuum for algae
How to clean dead algae from a pool
There are solutions to remove algae from your pool and the best way is to have a commercial pool monitoring system.
You should be aware that algae are still green but they are still not dead. In addition, some pool owners use these methods and discover more dead algae the day after cleaning.
If one of these is in your case, the pool still has algae and it will just keep coming back. You need to push the pool (or slam it) to make sure every single germ is extinct. If your pool needs repairing service get from poolscreensrus.
After you vacuum your pool
When you have finished cleaning your pool, remove the vacuum head from the telescoping pole and drain any water in the vacuum hose. Attach your cleaning brush to the pole and use it to remove any algae, dirt and debris from the side of the pool.
Clean any debris from your pump strainer basket and give the filter a final backwash if you have a multiport system and use the “filter” setting.
If you use the “waste” setting to vacuum the pool, make sure you return the valve to the “filter” setting and continue adding fresh water to your pool until the water level is restored.
Once you have risen above your water, test your pool water and adjust the chlorine according to your alkalinity, pH and need.
Final word
Although algae themselves are not harmful to humans or pets, they can spread harmful germs and trap bacteria in pool water. When algae grow on top of the pool, it can create some glamorous areas for the pool, as the algae are slippery and greasy. Remember prevention is better then cure, if you use a chlorine shock product, the pool water crystals will become clear. To solve a sick problem, use a pump and vacuum in the right way at the right time. Then you will enjoy your favorite swimming pool.